Concrete sawing & drilling
Sixteen years on the tools, one fully equipped truck, and slurry control that leaves your site clean. Straight answers and a price you can work to, right across South East Queensland.
Three things, done properly
Sawing and drilling concrete is all we do. The truck is set up for it and the work does not get handed on, so the job you book is the job that turns up.
Concrete Drilling
Core holes through slabs, walls and footings for plumbing, electrical, HVAC, balustrades and anchors.
Drilling
Concrete Sawing
Road and floor sawing, hand and ring sawing, and soft cut joints for driveways, slabs and trenches.
Sawing
Cutting Services
Soft cut and control joints, flush cutting, kerb cutting and trench work where a standard saw will not reach.
Cutting services
Slurry control comes standard
Our truck runs a slurry control system, so the water and concrete waste from wet cutting gets captured rather than spread across your site. That is the difference between handing back a work area and handing back a mess.
It matters most on occupied buildings, finished floors, indoor work, and anywhere runoff is a compliance problem.
- Water and waste captured at the cut
- Suited to indoor and occupied sites
- Less clean-up time on your program
Builders, trades and homeowners
A single core hole for a plumber gets the same attention as a week of saw cutting on a commercial slab. Being owner operated means the person who quotes the job is the person who turns up to do it.
- Builders and site managers working to a program
- Plumbers, electricians and HVAC trades needing penetrations
- Concreters needing joints cut on time
- Homeowners cutting driveways, paths and slabs
All of South East Queensland
Tweed to Toowoomba. Brisbane and Moreton Bay most weeks, the Gold Coast and Ipswich as well. Further out, ask anyway.
Before you call
What areas do you cover?
All of South East Queensland, Tweed to Toowoomba. Brisbane and Moreton Bay most weeks, the Gold Coast and Ipswich as well. Further out, ask anyway.
Is there a minimum job size?
No job too big or too small. A single core hole for a plumber gets the same attention as a week of saw cutting on a commercial slab.
Who turns up to the job?
The person who quoted it. Aus Cut is owner operated and runs one fully equipped truck, so the work does not get handed on and what you are told on the phone is what happens on site.
What happens to the slurry?
The truck is fitted with slurry control, so the water and dust are collected as we cut. On a finished driveway or an occupied building that is usually the part that matters most.
Do services need locating before you cut?
If there is reinforcement, post tensioning or services in the slab, have it located and marked before we arrive and we will cut to the marks. Unfortunately we cannot do the scanning or locating ourselves.
Can you price a job over the phone?
Usually. Tell us where the job is, what needs cutting or drilling, how thick it is and how we get the truck to it. You will get a straight price back with no obligation.
Tell us about the job
Send through the location, what needs cutting or drilling, and roughly when. You will get a straight price back with no obligation.